Getting it right in mixed-use buildings: Codes and standards

Mixed-use buildings—often a combination of retail and residential—are unique structures with varying needs. A variety of codes and standards dictate building design.

09/29/2015


Michael Albanese, PE, LEED GA, Senior Associate, Kohrs Lonnemann Heil Engineers, Fort Thomas, Ky. Courtesy: Kohrs Lonnemann Heil EngineersDavid Callan, PE, CEM, HBDP, LEED AP, QCxP, Vice President, McGuire Engineers, Chicago. Courtesy: McGuire EngineersDonna Miller, PE, PEng, LEED AP, Vice President, Engineering, WD Partners, Dublin, Ohio. Courtesy: WD PartnersGary Poole, PE, Principal, Bury Inc., Houston. Courtesy: Bury Inc.Andrew H. Smith, PE, CEM, LEED AP, Principal, Jordan and Skala Engineers, Dallas. Courtesy: Jordan and Skala Engineers

Respondents

Michael Albanese, PE, LEED GA, Senior Associate, Kohrs Lonnemann Heil Engineers, Fort Thomas, Ky.

David Callan, PE, CEM, HBDP, LEED AP, QCxP, Vice President, McGuire Engineers, Chicago

Donna Miller, PE, PEng, LEED AP, Vice President, Engineering, WD Partners, Dublin, Ohio

Gary Poole, PE, Principal, Bury Inc., Houston

Andrew H. Smith, PE, CEM, LEED AP, Principal, Jordan & Skala Engineers, Dallas  


CSE: Please explain some of the international codes, standards, and guidelines you use as a guide on mixed-use buildings. 

Poole: While no code or standard can address all situations, we have found that the international family of codes (International Fire Code, for example) is a very good basis to begin the design of projects. From there, it really varies on a case-by-case basis, taking into account city codes and a client's certification goals (LEED, etc.).

Smith: Projects shall comply with applicable codes and local amendments. In addition, ASHRAE and local green codes need to be considered.

Miller: Codes, guidelines, and standards used for international projects vary much in the same way that codes, standards, and guidelines vary by state. Some of the codes that we use for our Canadian projects are the National Plumbing Code of Canada, the Canadian Electrical Code, and the National Building Code of Canada.

CSE: How have International Building Code, NFPA, ASHRAE, and other codes affected your work on mixed-use projects? What are some positive/negative aspects of these guides?

Callan: Being a contrarian by nature, I am sometimes perplexed by the actions of my colleagues who participate in the creation and maintenance of codes and standards. For instance ASHRAE Standard 90.1: Energy Standard for Buildings Except Low-Rise Residential Buildings and ASHRAE Standard 62.1: Ventilation for Acceptable Indoor Air Quality have become so arduous to use, I often wonder if my friends should consider a career shift to writing tax code for the IRS. The wall in my office has a slight indentation from where I have occasionally banged my head upon reading the latest amendments to these fine documents.

Smith: The IBC codes are changing faster than engineers and cities can read and put them into effect. Often there are conflicts between the codes requiring international code council interpretation. The ventilation changes to codes over the past few years have resulted in increased mold and pollutant concerns and added to the cost of construction. Code has advanced faster than technology, placing greater liability on the owner and design team.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me