Genset control system

07/14/2010


The DGC-2020 integrated genset control system from Basler Electric Co. provides genset control, transfer switch control, metering, protection, and programmable logic in a compact package. The control system features generator sequencing via LSB-2020 load sharing module, 16 programmable contact inputs, 7 contact outputs, three 30 Adc and four programmable 2 Adc rated contacts. The control system has enhanced generator protection 51 and 47 (optional) and SAE J1939 engine ECU communications.

Basler Electric Co.
Circle 457
www.basler.com



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me