Flexible design and nimble systems help prepare for a biomedical emergency

A careful examination and prepared approach resulted in an adaptable facility built to accommodate the client’s developing business needs.

12/19/2016


If a public health crisis arose, each CIADM needed to transition from normal operations to emergency production mode and provide surge manufacturing to address the crisis. Courtesy: CRBA global specialty bio-pharmaceutical company entered into a public-private contract worth $220 million with the Biomedical Advance Research and Development Authority (BARDA) in 2012. Its primary goal was to establish a Center for Innovation in Advanced Development and Manufacturing (CIADM) in order to address challenges encountered with developing bio-defense medical countermeasures.

One component of the CIADM's vision was an expansion of the client's facility to provide flexible vaccine-manufacturing capabilities. The investment came as part of a private-public partnership with BARDA to establish the client's facility as one of three new CIADMs to develop and manufacture vaccines and medical countermeasures, according to its own mission and business objectives on a day-to-day basis.

If a public health crisis arose, each CIADM needed to transition from normal operations to emergency production mode and provide surge manufacturing to address the crisis. The client had to produce at least 50 million doses of pandemic influenza vaccine within four months.

The existing facility was a 32,000-sq ft, three-story structure. Expansion to the facility added 64,000- sq ft of manufacturing, administrative, quality, and warehouse space. While the production processes were being developed, the client proceeded with the design and construction of a multi-process manufacturing space. CRB met the demanding criteria of a multi-platform, multi-product, and multi-scale manufacturing facility-along with the client's desire to maximize the utilization of capital investments such as equipment, space, and utilities- by designing a flexible facility that is easily reconfigurable between campaigns.

To address the various scale and types of processes, equipment pieces were carefully selected and sized to create a broad process envelope. The expression systems were as follows:

  • 500-liter microbial
  • 2,000-liter monoclonal antibody
  • 2,000-liter insect cell/baculovirus
  • 2,000-liter mammalian cells/virus propagation

There were numerous production technologies and regulatory considerations:

  • National Institute of Health (NIH) BSL-2 containment
  • Intra- and extra-cellular product recovery and purification
  • Open- and closed-processing unit operations
  • Hybrid process equipment approach of portable process stations with fixed stainless-steel equipment and single-use systems
  • Process suites configurable for multiple products and scales

The open-processing unit operations and BSL-2 containment requirements created an interesting twist to the notion of flexible facility design. Industry trends and CRB's FutureFacility concept approach move toward flexible facility design with open ballrooms and minimal segregation based on closed processing. Being flexible with the client's project parameters and ranges meant physical segregation of various operations, air classification, gowning, and airlock transitions. The layout provided five adjacent process suites which then provided cell+/cell-, virus+/virus-, and open- or closed-processing segregation.

In addition to the architectural considerations, CRB paid close attention to the design of utility generation and distribution systems. Generation systems were sized to account for large swings in utility usage with turn-down capability designed to to improve efficiency. The distribution of critical process utilities maximized flexibility by allocating utility drops at areas that could accommodate the various process scenarios. These interchangeable utility stations enable plug-and-play operation and allows the client to move equipment in and out of the space in rapid response to production demands.

The client's desire for flexibility required a layered design approach that accounted for these goals:

  • Conceptual design focused on layout development factoring in equipment move-in paths, multiple equipment arrangements, and physical segregation of spaces
  • Basic design focused on right-sizing the process and process utility systems to meet varying demands while maximizing operating efficiencies
  • Detailed design focused on leveraging distribution of systems throughout the space and ensuring final design accounted for multiple operating scenarios

This careful examination and prepared approach resulted in an adaptable facility built to accommodate the client's developing business needs. It also meet rigorous demands established by BARDA in the event of pandemic declaration all within established industry-costing benchmarks.

Allan Bream, CRBMatthew Khair, EIT, CRBGrace Linton, AIA, LEED AP, CRBJack Striebel, CRB


-Allan Bream and Matthew Kahir, EIT, are process engineers, Grace Linton, AIA, LEED, AP, is an architect, and Jack Striebel is an associate/process specialist at CRB. This article originally appeared on CRBlog. CRB is a CFE Media content partner.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me