Fire protection detection tubing

Firetrace International has just been granted the LPCB (Loss Prevention Certification Board) approval for both its 3M Novec 1230 and FM-200 direct low pressure (DLP) systems.

04/17/2017


Firetrace International has just been granted the LPCB (Loss Prevention Certification Board) approval for both its 3MTM NovecTM 1230 and FM-200 direct low pressure (DLP) systems. Firetrace International has just been granted LPCB (Loss Prevention Certification Board) approval for both its 3M Novec 1230 and FM-200 direct low pressure (DLP) systems. The approval is important to the electrical sector as it covers 1-, 2-, and 5-kg systems for electrical panels up to 2 m3 in volume.

Firetrace’s detection tubing is a long proven and commonly used fire suppression solution. By using a pneumatic polyumer tubing for both detection and delivery, fire protection is elevated to the in-cabinet—and often even component—level protection. Adoption of detection tubing by the electrical industry has been slowed by a lack of recognized sector standards to allow an independent evaluation of the system’s effectiveness. 

Firetrace International

www.firetrace.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me