Fire market to embrace wireless and IP technologies?

The fire market is starting to see increased interest in wireless and IP-enabled products.

06/27/2014


 

 

Despite traditionally being slow to use new technologies, the fire market is starting to see increased interest in wireless and IP (Internet Protocol)-enabled products.

Wireless products have typically been used in specific applications where wiring is difficult such as historical buildings, but outside of this the market has been virtually non-existent.  Barriers such as reliability, price, variations in frequencies and installer reluctance have slowed adoption. However, wireless is starting now to be embraced. This is particularly true in the United Kingdom (UK) and Nordic countries. IHS estimates some 25% of sales of wireless products in Europe are taking place in the UK. End-users are now willing to spend a bit more upfront for the product, in exchange for lower installation costs since wiring is not necessary.

The main barrier to mass-market adoption is the integrator/installer channel. Installers continue to be reluctant to market wireless products because they would need to complete more installations to make the same amount of money as they do with wired installations. So while end-users see benefits, installers struggle to see any advantages.

For IP, increasing demand to integrate multiple building systems is driving acceptance.  Large facilities, centrally managed chains and campus-style buildings want to connect multiple building systems together to gather higher levels of data on a single platform. Surprisingly, most demand for these solutions is coming from the Middle East and Southeast Asia where legislation is more lax on integration standards. Here buildings are integrating fire equipment with building management, security, and lighting equipment to improve operational efficiencies and have fewer people reviewing/monitoring the information. It is expected to not only increase adoption for networked addressable panels, but should also increase use of more sophisticated communication channels such as IP and Modbus.

Demand for these technologies is expected to remain modest in the short-term. However, as other building technologies such as access control, video surveillance, intruder alarms, building automation, elevators, and visitor management systems move to use wireless and IP-ready products, and be integrated, the fire industry may be hard-pressed not to follow-suit.

Justin Siller joined IHS in 2008 as an associate director for the access control & fire group. He is also involved in conducting research and analysis on the electronic security and building automation industries. This content originally appeared on IHS.com. Edited by Brittany Merchut, Project Manager, CFE Media, bmerchut(at)cfemedia.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me