Fire, life safety in educational facilities

Respondents to the Consulting-Specifying Engineer 2016 Fire and Life Safety Study identified 5 findings as they relate to K-12/college/university projects.

12/15/2016


Fifty-six percent of respondents to the Consulting-Specifying Engineer 2016 Fire and Life Safety Study specify, design, or make product selections for educational facilities-and 9 in 10 of these engineers are responsible for determining requirements/writing specifications for these projects. Below are 5 fire and life safety findings as they relate to K-12/college/university projects:Figure 2: When selecting fire and life safety products for educational facilities, the most important factors that engineers consider are product quality (98%), a manufacturer’s reputation (94%), and the availability of service support (89%). Courtesy: Co

  • Products specified: The most commonly specified systems for educational facilities include fire, smoke, heat, and linear detection (81%); smoke detection, control systems, dampers, etc. (77%); and network and intelligent fire alarm control panels (63%).
  • Annual specified systems value: On average, respondents' firms specify $2.58 million annually in fire and life safety systems for educational facilities; 31% specify more than $3 million.
  • Specifications written: Performance (79%) and prescriptive specifications (64%) are most frequently written for educational facilities, followed by open specifications (proprietary, 50%).
  • Future of fire, life safety systems: The subjective interpretation of regulations by code authorities (74%) and an inadequate budget for good design (64%) are the top issues affecting the future of fire and life safety system design in educational facilities.
  • Disciplines impacting design: Local authorities having jurisdiction or local fire officials have the most impact on educational facility fire and life safety design, according to 76% of respondents. Owners and architects also have a generous say in these designs.


Figure 1: The two most critical issues affecting the future of electrical or power systems are budget/cost and the lack of a skilled workforce. Courtesy: Consulting-Specifying Engineer 2016 Electrical and Power Study8 in 10 lighting engineers currently specify LEDs; lighting controls; and/or T5, T8, or T12 (any size) fixtures. Courtesy: Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study

3/4 of mechanical engineers determine requirements/write specifications for HVAC systems, equipment, and controls. Courtesy: Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems Study

65% of fire protection design engineers usually write prescriptive fire and life safety system specifications. Courtesy: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

More Research

Consulting-Specifying Engineering covers sever research topics each year.


View more information at www.csemag.com/2016FireLifeSafety. Amanda Pelliccione is the research director at CFE Media.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
June 2018
Chilled-water system design, NFPA 99, Grounded power supply systems
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me