FERC Chair Slams: Reliability Audit Results

Regulators at the Federal Energy Regulatory Commission (FERC) say voluntary efforts by the electric utilities have fallen short of what's needed to boost grid reliability. Commission members say these shortcomings illustrate the need for mandatory transmission-system reliability standards and corresponding penalties.

12/01/2004


Regulators at the Federal Energy Regulatory Commission (FERC) say voluntary efforts by the electric utilities have fallen short of what's needed to boost grid reliability. Commission members say these shortcomings illustrate the need for mandatory transmission-system reliability standards and corresponding penalties.

The statements were made following a late-September review of an audit program led by the North American Electric Reliability Council that was intended to check compliance with voluntary standards established in the wake of the August 2003 blackout. FERC Chairman Pat Wood , among other commission members, noted both the lack of urgency with which audits were being carried out and the vast range of compliance between best and worst operations.

As of Sept. 29, only 35 of 145 transmission-system control areas and four of 18 grid-reliability coordinators had been audited, FERC commissioners noted. In addition, commissioners stated that auditors were downplaying the failures of poorly performing organizations. These failings included:

  • Backup control facilities that in some cases amounted to no more than a double-wide trailer, with a folding table and laptop computer.

  • Operator training requirements being ignored to the extent that training hours were being used to cover vacation and sick leave.

  • Poor communication that, in one case, led grid managers to be confused about the amount of voltage required by a connected nuclear power plant. Additionally, grid managers in at least two audited organizations said they would ignore orders to curtail power from technicians monitoring regional operations unless they were also convinced that reliability was at stake.



Info

Get more on this month's news stories with the following web links:

American Wind Energy Association

 

Initiatives for Proliferation Prevention

 

National Electrical Contractors Association - National Electrical Installation Standards

 

Power Reliability and Security Council

 

Southwest Research Institute Electromagnetic Compatibility Research

 

U.S. Air Force Research Laboratory

 

U.S. Army Corps of Engineers - New England District

 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me