Fan efficiency standard approved

ANSI and AMCA approved Standard 205, which defines fan efficiency grades (FEG), an energy efficiency classification for fans.

06/01/2012


The Air Movement and Control Association International, Inc. (AMCA International), announced that the Board of Standards Review of the American National Standards Institute (ANSI) approved the document about ANSI/AMCA Standard 205.

ANSI/AMCA Standard 205 defines fan efficiency grades (FEG), an energy efficiency classification for fans. The scope includes fans having an impeller diameter of 125 mm (5 in) or greater, operating with a shaft power 750 W (1 hp) and above, and having a total efficiency calculated according to one of the following fan test standards: ANSI/AMCA 210, ANSI/AMCA 230, AMCA 260, or ISO 5801. All other fans are excluded. The standard only applies to the fan, not the fan drive or the fan system.

This standard may be used by legislative or regulatory bodies for defining the energy efficiency requirements of fans used in specific applications. AMCA 205 is referenced in the 2012 International Green Construction Code and is under consideration for ANSI/ASHRAE/IES 90.1.

Learn more about the standard here.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me