Express serial cards to replace existing products

Aaxeon's multi-port RS-232 and 2-port RS-232 + 1 port parallel Express Serial Cards will replace the MSC-204A1 and MSC-202ALP.

03/31/2012


Aaxeon's multi-port RS-232 and 2-port RS-232 + 1 port parallel Express Serial Cards will replace the MSC-204A1 and MSC-202ALP. Courtesy: AaxeonAaxeon released its 4-port RS-232 and 2-port RS-232 + 1-port parallel Express Serial Cards to replace their already existing products the MSC-204A1 and MSC-202ALP respectively. 

The MSC-204A2 provides 4 high performance 16C950-type UART compatible RS-232 serial ports. It features a 1-chip solution for PCI Express boards to increase throughput and reduce CPU loading. The MSC-202ALP1 PCI Express I/O adapter provides 2 high performance 16C950-type UART compatible serial ports and bi-directional parallel ports. Both are designed for a PC, thin client, or server to provide instant COM port expansion via the PCI Express Bus (PCIE). 

The new multi-port serial cards still retain all the benefits of its predecessors, providing increased throughput, reduced CPU load, serial bus speeds of 250 Mbytes/sec to 4 GBytes/sec, full plug-and-play compatibility, serial power over Pin-9, and no IRQ or I/O address conflict problems. 

These new revised multi-port serial card versions provide the scalability to quickly adapt to new PCI Express technologies allowing the user to still add serial and parallel connectivity when necessary.

Aaxeon Technologies

www.aaxeon.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me