Ethernet/IP I/O modules

Belden Inc. has released Ethernet/IP modules that can connect to discrete wiring devices via 16 digital I/O channels with universal input/output or input functionality

01/24/2012


Belden Inc. has released Ethernet/IP modules that can connect to discrete wiring devices via 16 digital I/O channels with universal input/output or input functionality. Courtesy: BeldenBelden Inc. (NYSE:BDC) introduced EtherNet/IP I/O modules facilitating the connection of discrete wiring devices (sensor/actuators) via 16 digital I/O channels with universal input/output or input functionality directly to industrial controllers.

These EtherNet/IP modules are available with 16 universal user-selectable digital inputs/outputs (0980 ESL 710) or 16 dedicated inputs (0980 ESL 711). The easy diagnostic concept helps to find the exact location of any faults for each I/O port with “on-board” LED diagnostic indicators. Access to this information is also available via the EtherNet/IP network: making it possible to evaluate the details on a centralized operating and display system, such as a Human Machine Interface (HMI), without having to configure the module.

Both modules fully support ODVA’s Device Level Ring (DLR) standard, enabling multi-port EtherNet/IP devices to operate in a ring or linear topology. DLR insures that a single-point failure does not prevent communication between the remainder of the functioning devices. The integrated switch allows both ring and line (daisy chain) topology. A substantial cost saving can be obtained as external switches are not needed.

Due to a rugged housing and IP67 terminations, these EtherNet/IP modules require no protective enclosure and can be mounted on machines. Operational temperatures are -10 C to +60 C; and 24 V dc (11-30 V dc) power input is through standardized 7/8-in. 4-pole power connectors. Network addressing is via rotary switches, BOOTP or DHCP.

Belden Inc.

www.belden.com

- Edited by Chris Vavra, Control Engineering, www.controleng.com

controleng.com/networks



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me