EPRI Successfully Tests New Device That Enhances Power Integration

11/28/2006


In a development that can significantly enhance the reliability of transmission and distribution systems, the Electric Power Research Institute (EPRI), Palo Alto, Calif., has completed testing of a prototype design of a solid state current limiter (SSCL), a device that restricts fault current from new generation or transmission and reduces switching surges.

The solid-state technology developed by EPRI, with primary support from Con Edison of New York, addresses the challenges faced by utilities as new sources of power are introduced to existing transmission and distribution systems.SSCL restricts fault occurrences when new capacity, such as the additional generation created by independent power producers, is integrated into existing power systems, creating a greater likelihood fault current.

 

The device alleviates the short-circuit condition and gradually phases in the new current. This current-limiting capability improves fault isolation and network protection, and helps resolve critical situations that can cause voltage sags and swells and power outages.

 

The next step in development of the new technology is to test it at a host utility to determine if it is suitable for widespread deployment.

 

“The successful testing of SSCL is a milestone for EPRI and the industry as we work cooperatively to enhance of transmission and distribution systems,” said Arshad Mansoor, Vice President of Power Delivery & Markets at EPRI.“This technology will allow utilities to significantly increase the capability and reliability of their existing power lines.”

 

Currently, utilities’ only option in addressing fault current issues is to replace breakers with higher-rated equipment, a solution that may not be economical or viable because of space constraints, and the difficulties associated with outages necessary for replacement may be severe. In addition, breaker replacements alone may not eliminate mechanical and magnetic bracing issues for other equipment that high fault currents pass through.

 

“The Solid State Current Limiter demonstrates that we now have a new piece of equipment able to safely withstand the impact of and limit prospective fault currents,” said Patrick Di Lillo, technical specialist at Con Edison.“This newly developed device can be used to mitigate the effects of the increased capacity required to serve increasing loads in our urban centers.We have already begun work to migrate this technology to higher normal current and voltage ratings."





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me