Engineering hospital systems to work effortlessly

While quite a bit of engineering goes into each mechanical, electrical, plumbing, or fire and life safety system in a hospital, it is mostly invisible to the patient or visitor. That is, until you need it.


A traditional hospital room has a complex set of electrical outlets, medical gases, alarms, and many other medical needs. Courtesy: CFE MediaHospital food notwithstanding, hospitals are pretty amazing places. People enter—sometimes walking, sometimes under more dire circumstances—and often leave relieved of any ills that they went in for. Some hospitals play celebratory music each time a baby is born, if only to remind those who are suffering in a hospital bed that joyous things also happen in hospitals.

The doctors, nurses, and specialists within the hospital are often the people we think of when it comes to hospital care, but it’s really a team effort. After a brief stay in a local Chicago hospital for an appendectomy and some other complications, I realized that the cleaning team, security staff, and yes, even the hospital nutrition department, were all key to recovery. Each person had a role in curing patients and took that role seriously in trying to make people feel more comfortable and secure in an unpleasant environment.

What fascinated me in this ultra-modern hospital, however, was the intricate set of medical gases, electrical systems, HVAC systems, and fire and life safety equipment. Most people don’t think they need 20 electrical outlets near their bed, yet when something goes wrong, those outlets can make all the difference in the world.

For patients struggling just to breathe, specialized environments like a negative-pressure room offer up that extra pulmonary assistance needed. Positive-pressure rooms, like operating rooms, fall at the other end of the spectrum. And throughout the entire hospital, the hallways, atriums, and general staff or visitor spaces have to meet normal HVAC requirements.

During my stay, I heard the public address system announcements about various hospital emergencies, the paging of specialized practitioners, and even a “toaster smoke reported, alarms temporarily disabled” notification.

All of these systems and people had to sync up perfectly to ensure each patient and staff member was safe and cared for in the best possible way.

My hat is off to those of you who engineer systems in hospitals. After just seeing the maze of measurement equipment, electrical systems, and call buttons involved in an everyday hospital room, I’m amazed that each system works together impeccably make a patient’s visit run smoothly, though there are a million things going on behind the scenes.

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me