Energy efficiency, reduction in GHG at Texas plant

DuPont's Packaging and Industrial Polymers operations site in Texas has achieved energy efficiency and reductions in green house gases.

08/12/2011


DuPont’s Packaging and Industrial Polymers operations site in Orange, Texas, has been honored by the American Chemistry Council (ACC), a U.S. trade association, for energy-efficiency improvements that also resulted in green house gas (GHG) reductions. The improvements saved approximately 540,000 million btu, enough to power 3,800 households, and reduced GHG emissions by more than 30,000 tons/year, according to DuPont.

The Texas plant upgraded the design of its ethylene furnaces and saved more than 67 million btu/hr fuel savings via the new system. The investment builds upgrades made in 2008 which reduced annual CO2 emissions by 34 million pounds (17,000 tons). The plant is DuPont’s largest manufacturing site in Texas and makes high performance ethylene copolymers, such as Surlyn ionomer resin and Vamac ethylene acrylic elastomers, which are used for packaging, automotive components, construction materials and other everyday items.

According to the ACC, innovations such as these by winners of its Energy Efficiency Awards in 2010 resulted in annual energy savings of 14.8 trillion btu. Winners were selected by the ACC’s Energy Team comprised of member representatives, academics and experts in the field of energy efficiency and were announced at the ACC Responsible Care Conference.

DuPont

www.dupont.com

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me