Energy company shifts focus to wind power

Consulting Engineers Group has delved into designing and building wind farms. The move has proven to be not only ecologically friendly, but also economically savvy.

09/15/2008


Farmington, Minn.-based Consulting Engineers Group (CEG)—a subsidiary of Dakota Electric Assn .—provides electrical utilities with design/build services on high-tech transmission and distribution systems. Five years ago, CEG began working in earnest on growing its involvement in the burgeoning wind power market.

According to vice president and senior project engineer Vince Granquist, the move has paid off in no small way.

“It is far and away our biggest area of growth,” said Granquist. “At this point, it is probably over 75% of the company’s focus.”

The new concentration started when Granquist noticed Carleton College, a nearby liberal arts school, had begun plans on a wind turbine. Curious, he started picking the brains of all the people involved in the project; his interest grew, and he moved onto contacting people on other small wind-related projects in his part of the state. Based on the stories Granquist heard and experiences he witnessed, the company decided to jump into wind farms itself.

A key aspect of a wind farm centers on the designing and installation of collection systems, including cable. CEG uses hundreds of thousands of feet of 35 kV underground cable (preferring Hendrix Wire and Cable’s TRXLP) cable to connect turbines to each other and back to the substation. Granquist estimates a typical 100 MW wind farm uses approximately $1 million worth of underground cable, about an eighth of the total electrical-work bill.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me