EEA Consulting Engineers: Thermal Utility and Electrical Masterplan

Generation and distribution project as part of a master plan at an educational facility.


Engineering firm: EEA Consulting Engineers
2014 MEP Giants rank: 83
Project: Thermal Utility and Electrical Masterplan
Address: Huntsville, Texas, U.S.
Building type: Educational facility,Utilities/public works/transportation
Project type: Other
Engineering services: Electrical/power, HVAC/mechanical, lighting, energy/sustainability, plumbing/piping, and other
Project timeline: 4/16/2012 to 3/27/2013
MEP/FP budget: $194,500


The project is a study of the 7,000-ton chilled water, 18,000 MBTU heating water, and electrical systems on campus and is part of a larger master planning project for Sam Houston State University performed by SmithGroupJJR. The following components were included in this study:

  1. Campus thermal utility cooling and heating load analyses
  2. Hydraulic models of the 33-building campus chilled and heating water systems as they are currently installed, as well as models depicting the campus master plan and resulting recommended utility infrastructure upgrades and improvements
  3. Thermal expansion model of the east campus heating water loop replacement
  4. Campus electrical system load analysis, short circuit and coordination study, and harmonic study.

The majority of the new master planned construction was located on two separate ends of campus. This created the challenge of providing new utilities to two new portions of the campus within a short period of time. Existing and new construction in addition to landscaping, known existing utilities, and general constructability were all considered in routing the new utilities throughout the campus. Initial capacity and distribution issues with the campus utility generation systems needed to be addressed in the master plan. Recommended scheduling was needed to identify priorities and coincidences with other planned projects on the campus. The university's desire for general system redundancy, coupled with several high-priority buildings, also needed to be integrated into the utility masterplan. Minimizing both system downtime and interruption to surface traffic were also extremely important considerations.


The final master plan for the system maximized usation of existing generation and distribution equipment (both in plants and piping) to allow for phasing of the utility infrastructure upgrade installations. This was to be done in two ways:

  1. Renovation of existing equipment to maximize capacity, and
  2. Connecting to the existing system in strategic locations that would maximize use of the existing piping under normal operating conditions.

The end result was a utility master plan that would provide a robust and redundant generating and distribution system capable of providing reliable utility service to the existing and planned customer buildings far into the future.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me