Dual compressor centrifugal chillers

York YD model “C” dual compressor centrifugal chillers from Johnson Controls feature Optispeed variable speed drives (VSD) and a large chill capacity.

08/24/2015


York YD model “C” dual compressor centrifugal chillers from Johnson Controls feature Optispeed variable speed drives (VSD) and a large chill capacity. Courtesy: Johnson ControlsYork YD model "C" dual compressor centrifugal chillers from Johnson Controls feature Optispeed variable speed drives (VSD) and a capacity range of 1,500 to 6,000 tons (5,300 to 21,000 kW). The unit-mounted low-voltage and floor-mounted medium-range VSD are designed to optimize the chiller and improve efficiency. At AHRI conditions (460 V/60 Hz), the YD model "C" provides up to 3,000 tons (10,550 kW) of cooling. It uses two York centrifugal compressors operating in parallel on a common set of heat-exchanger shells to obtain large chill capacities. The YD model is designed for retrofit applications, district cooling, hospitals, and higher education facilities.

Johnson Controls

www.johnsoncontrols.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me