Distributed Generation

Documents filed with the SEC by Fuelcell Energy Inc., Danbury, Conn. state that "currently, in the U.S., according to the Department of Energy, there are approximately 805,000 megawatts of installed power capacity. We believe that distributed generation currently accounts for approximately 10 percent of this capacity."In addition, we believe that the combined available U.S.

03/01/2001


Documents filed with the SEC by Fuelcell Energy Inc., Danbury, Conn. state that "currently, in the U.S., according to the Department of Energy, there are approximately 805,000 megawatts of installed power capacity. We believe that distributed generation currently accounts for approximately 10 percent of this capacity.

"In addition, we believe that the combined available U.S. and European market for distributed generation will reach approximately 5,400 mW per year by 2001, and approximately 7,600 mW per year by 2004, and that fuel cells will be one of the leading technologies in meeting these market demands."

According to the document, a 1999 report on small-scale power generation by Business Communications Co., Inc. states that fuel cells are one of the most promising technologies for meeting the increasing worldwide demand for energy. It was projected that between 1998 and 2003, distributed generation would grow at an average annual rate of 14.9 percent in the United States and 28.4 percent worldwide, and that the total annual U.S. market for fuel cells in 2003 could be expected to reach $1.1 billion.

"We believe that the growth of the distributed generation market, combined with the continuing deregulation of the utility industry, and the increasing demands for higher efficiency, higher quality, more environmentally friendly, and lower-cost power generation capacity, provide market opportunities."

From Pure Power, Spring 2001





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me