Coursin named AHRI chair

The Air-Conditioning, Heating and Refrigeration Institute has picked Wisconsin-based HVAC/R executive Keith Coursin to lead its Board of Directors.

01/05/2009


Keith Coursin, president of Germantown, Wis.-based Desert Aire Corp. has been elected chairman of the board of directors of the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). The group tapped Coursin at its Nov. 16 meeting in Carlsbad, Calif.

An active AHRI member for more than 10 years, Coursin has served as AHRI's treasurer; chairman of the dehumidifiers product section; and a member of the association's audit committee, budget and investment committee, education and training committee, and exposition policy committee.

Other officers elected at AHRI's annual meeting include:
* Vice chairmen: Morrison Carter, Beckett Gas Inc. , North Ridgeville, Ohio; Ray Hoglund, Hill PHOENIX , Conyers, Ga.
* Immediate past chairman: David Myers, Johnson Controls Inc ., Milwaukee
* Treasurer: Harry Holmes, Morrison Products Inc ., Cleveland.

AHRI’s board also elected 11 vice presidents:
* Todd M. Bluedorn, Lennox International , Richardson, Texas
* Steven S. Duerwachter, Baltimore Air Coil , Baltimore
* Dan Ellis, ClimateMaster , Oklahoma City
* J. R. Jones, Rheem Manufacturing Co. , Atlanta
* Bonnie Kern-Koskela, Maxitrol , Southfield, Mich.
* David LaGrand, Nordyne , O'Fallon, Mo.
* Michael Lehman, Bard Manufacturing Co ., Bryan, Ohio
* Edgar M. Purvis, Jr., Emerson Climate Technologies , Sidney, Ohio
* Ajita Rajendra, A.O. Smith Water Products , Ashland City, Tenn.
* John Reilly, National Refrigeration Products , Philadelphia
* Eric Roberts, CES Group , Chaska, Minn.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me