Configurable router and security appliance

The GarrettCom Magnum 10RX by Belden is designed for industrial applications and supports mixed TCP/IP and legacy protocols and comes with up to 10 Gigabit Ethernet ports.

02/01/2013


The GarrettCom Magnum 10RX by Belden is designed for industrial applications and supports mixed TCP/IP and legacy protocols and comes with up to 10 Gigabit Ethernet ports. Courtesy: BeldenBelden Inc's. (NYSE: BDC) GarrettCom Magnum 10RX Configurable Router and Security Appliance offers advanced layer 3 networking protocols, firewall and secure virtual private networking for heavy duty industrial applications where high performance and security are required. The 10RX is designed for mission-critical applications such as power utility substations, smart grid deployments and other industrial networks with multi-protocol requirements, tight security directives and quality of service demands. It supports mixed TCP/IP and legacy protocols, a requirement of many existing substations.

A configurable WAN router with up to 10 Gigabit Ethernet ports, 16 T1/E1 ports or 32 serial connections, the 10RX also provides protocol support for legacy as well as MPLS interoperability. The 10RX, a member of the Magnum 10-series next generation line of substation connectivity products, incorporates a new hardware and software architecture designed for maximum speed and flexibility. Its advanced Industrial Network Operating System (INOS) supports a wide range of routing protocols including RIP, OSPF, BGP and others, and it is compatible with Magnum MNS-DX management software.

Belden, Inc.

www.belden.com 

Belden, Inc. is a CSIA member as of 3/1/2015



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me