Closed circuit cooler

EVAPCO’s eco-LSWE is a closed circuit cooler with an ellipti-fin coil

06/29/2017


The spirally finned elliptical tubes increase both wet and dry capacity. Courtesy: Evapco Inc.

New from EVAPCO are the eco-LSWE closed circuit coolers with an ellipti-fin coil and CrossCool internally enhanced tubes to increase the heat transfer of the coil, improving the unit’s cooling capacity. The units range in capacity from 340 to 16,987 MBH.

The eco-LSWE coolers offer greater capacity in a smaller footprint than traditional bare-tube, forced draft coolers, making them suitable for replacement jobs where additional capacity is needed within tight space constraints. This makes the eco-LSWE a good match for installations where increased capacity is required, but the existing footprint cannot be altered. The eco-LSWE also offers reduced unit height and total connected horsepower.

Evapco Inc.

www.evapco.com



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me