China versus the U.S.: A battle over pipe tariffs

A tariff battle is being waged over steel pipe imported from China.

12/11/2007


Last month, the U.S. Dept. of Commerce found that the Chinese government has been providing improper subsidies on Chinese circular welded steel pipe exports to the United States.

Circular welded steel pipe products are described as standard and structural pipe used in plumbing applications, HVAC systems, sprinkler systems, fencing, and construction.

In its preliminary determination, the Commerce Dept. will impose tariffs on China pipe exports to offset the unfair advantage of subsidies. The United States found that Chinese pipe was subsidized by an average rate of 16.59%. Individual rates ranged from a high of 264.98% down to 0% for one company.

Most Chinese producers will be subject to a duty of 16.59%. The Department of Commerce has also applied critical circumstances, determining that this duty could be applied retroactively by 90 days.

The pipe imports subject to the petition against China have surged from 10,000 tons in 2002 to more than 750,000 tons in 2007—a 6,900% increase. The result has been the loss of 500 domestic jobs, approximately 25% of the total workforce employed in this segment of the domestic pipe industry.

Treasury Secretary Henry M. Paulson Jr. and other cabinet members are preparing for the next round of a “strategic economic dialogue” beginning in Beijing on Wednesday, aimed at easing tensions. But in many cases the two nations seem to be talking past each other, aggravated by American actions like the threatened steel duties or China’s reluctance to crack down on unsafe food and toys.

At a time of heightened American anxiety over the effects of globalization, tension among manufacturing plant workers illuminates how esoteric trade disputes, where the facts are often ambiguous, usually boil down to little more than American jobs versus Chinese jobs.

For The New York Times article on this subject, click here .

For the United Steelworkers’ angle on this story, click here .





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me