Case study: Madonna Rehabilitation Hospital, Lincoln, Neb.

The challenge was to design of a light-filled, 110-bed, 250,000-sq-ft rehabilitation hospital, which requires and is dependent on direct access to natural light to nurture a healing environment.


Figure 1: Indirect lighting in this space at the Madonna Rehabilitation Hospital in Lincoln, Neb., also reduced glare of direct lighting, giving the space a softer light with heavy reliance on daylighting. Challenge: Design of a light-filled, 110-bed, 250,000-sq-ft rehabilitation hospital, which requires and is dependent on direct access to natural light to nurture a healing environment.


  • The lighting power density was 0.78 W/sq ft, compared to the code maximum of 1.2, which is a 35% improvement.
  • The lighting controls were designed around ASHRAE Standard 90.1-2007.
  • Patient rooms: Individual room controller with combination of 0 to 10 V dimming and switched lighting loads. Manual daylight zone control.
  • Corridors: Bi-level switching throughout all corridors. Lighting to 50% is always on, although controlled by a relay if future adjustment of the control scheme is desired, with manual control of the additional 50% output at the nurses’ stations.
  • Rehabilitation gymnasiums: Relay control for automatic-off control of lighting after hours, and low-voltage switches with the room broken up into multiple zones to allow for some lights to remain off if the entire gym is not in use.
  • Occupancy sensors, in a manual on and auto off configuration, were used in offices, work rooms, storage rooms, restrooms, etc.

Eric Kamin is a principal leader in DLR Group’s electrical engineering practice. He is skilled in developing specifications for primary and secondary power distribution, standby power systems, voice and data cabling systems, security systems, interior and exterior lighting design, and sports lighting design.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me