Case study: Integrating lighting, HVAC in a lab

A new lab building uses a hybrid wired and wireless approach to optimize controls.


As stricter energy codes continue to be introduced and enforced, the design and construction of high-performance buildings are becoming standard practice in some parts of the country. A recently completed laboratory building in central California implemented a network control system using a hybrid wired and wireless approach by combining lighting, daylighting, and HVAC zones to optimize controls.

Within a large open-office area in the building, long suspended indirect/direct LED luminaires are controlled in 8-ft increments with integrated sensors in each section. These sensors not only control the lighting but also the variable air volume boxes that are part of the mechanical system. As a result, the lighting and temperature control within these larger spaces have become more granular, only controlling the specific areas that are detected as being occupied.

While the daylit sections of the open office may ultimately require greater cooling in the summer, this becomes offset by the savings of reduced electric lighting. Smaller spaces are managed as single-zone areas, particularly those that are infrequently occupied, such as break rooms and small conference rooms. Space types that fall between those extremes, such as private offices, can be tailored to a specific occupant’s preferred temperature and illuminance level.

No space size or type is excluded from this use of integrated network lighting and HVAC-control technology. With appreciable benefits to occupants and continuing reduction in cost through further market adoption and competition, these strategies appear to be increasingly applicable across building types.

Sagar Rao is a building performance consultant with Affiliated Engineers IncAngi Xanders is a senior lighting designer at Pivotal Lighting Design.

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me