Carl R. Darnall Army Medical Center January and February update

South Clinic TAB is completed. Functional performance testing on the boiler system, water softener, and domestic water heat exchangers is underway.


Hospital Level 3 Mechanical Room. Photo by Kristi KoenigJanuary-February 2015 update:

  • South Clinic test and balance (TAB) is completed.
  • South Clinic punchlist activities are nearing completion.
  • Hospital TAB is underway. 
  • Hospital Basement and level 1 finish are nearing completion.
  • Hospital Basement projected to be turned over to U.S. Army Corps of Engineers mid-February.
  • MRI equipment has been delivered, utilities connected and commissioned.
  • Functional performance testing on the boiler system, water softener, and domestic water heat exchangers is underway.

MRI Equipment Room. Photo by Kristi KoenigHospital Level 1 Servery. Photo by Kristi Koenig

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Developing lighting solutions; Designing lighting systems; Integrating fire alarm and HVAC systems
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me