Cable tray helix

T&B Cable Tray Helix Fittings are available in left or right configurations.

06/04/2015


The T&B Cable Tray Helix Fittings from Thomas & Betts ease transitions between horizontal and vertical cable tray runs, especially in confined areas and near walls. T&B Cable Tray Helix Fittings are available in left or right configurations in aluminum, pre-galvanized steel and stainless steel in 12- and 24-in. widths, with 6-in. side rails. They can be ordered and shipped pre-assembled and ready to install, saving substantial time by not having to configure fittings on site.

Thomas & Betts Corp.

www.tnb.com



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
January/February 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me