Building Design Leaders Unite on Energy Reduction Targets

To reduce the building design industry’s impact on the environment, key leaders in that sector
are collaborating to establish carbon-neutral buildings by the year 2030.


are collaborating to establish carbon-neutral buildings by the year 2030.

The American Institute of Architects (AIA), the American Society of Heating, Refrigerating and Air-
Conditioning Engineers (ASHRAE), Architecture 2030, the Illuminating Engineering Society of North
America (IESNA), and the U.S. Green Building Council, supported by representatives of the U.S.
Department of Energy, finalized an agreement of understanding this week, establishing a common starting
point and a goal of net zero energy buildings.


“This agreement allows the building design sector to move forward with designing buildings that use
substantially less energy, reduce greenhouse gas emissions and create spaces that are healthy and
comfortable,” according to the groups.


While focused on designing net zero energy buildings, the ultimate goal is carbon-neutral buildings
by 2030. In joining together, the groups recognize that “the building sector accounts for almost half of all
greenhouse gas emissions in the U.S. annually.”


To reach that goal, AIA, ASHRAE, Architecture 2030, IESNA and USGBC agreed to define the
baseline starting point for their common target goals as the national average energy consumption of existing
U.S. commercial buildings as reported by the 2003 Commercial Building Energy Consumption Survey
(CBECS). CBECS data is a set of whole-building energy use measurements gathered by the DOE’s Energy
Information Administration, which can be used to determine a national energy use intensity using kBTU/sq ft-
yr. as the metric.


“ASHRAE is excited to work with the various organizations that have participated in developing this
agreement,” Terry Townsend, ASHRAE president, said. “Collectively, our programs, initiatives and goals
now have an agreed-upon baseline to operate from in our common quest to achieve a sustainable future. The
challenge is now upon each organization to make good on their commitments."


“The task we face is daunting,” Edward Mazria, founder and executive director of Architecture
2030, said. “Working separately, we could accomplish something significant in each of our respective
spheres. But by working together, we actually have a chance to influence the course of history- and we


"Establishing a baseline for reducing energy consumption is a critical step in the goal of curbing the
emissions generated by the built environment," said AIA president RK Stewart, FAIA.
the design and construction industry can use this reference point to ensure that new or renovated buildings
are designed to operate in a smart, healthy and efficient manner."


“This agreement is a significant demonstration of the importance of an ongoing alliance among the
key organizations responsible for building design,” Kevin Flynn, IESNA president, said. “Careful
deliberations have resulted in agreed upon goals for addressing substantial reduction in energy use. IESNA
looks forward to pursuing these goals in collaboration with the partnering organizations.”


“By working together on this important initiative, we will make a difference in the built
environment,” said Rick Fedrizzi, President, CEO & founding chair, USGBC. “Buildings are a big piece of
the climate change puzzle but the good news is they are also partof the solution, and together we will make
an impact.”

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me