Berkeley Lab examines state-renewables portfolio standards policies

A growing number of states is supporting renewable electricity through the creation of renewables portfolio standards (RPS). A report released by the U.S. Dept. of Energy's Lawrence Berkeley National Laboratory provides a comprehensive overview of the early experiences with these state-level RPS policies.

06/01/2008


A growing number of states is supporting renewable electricity through the creation of renewables portfolio standards (RPS). A report released by the U.S. Dept. of Energy's Lawrence Berkeley National Laboratory provides a comprehensive overview of the early experiences with these state-level RPS policies.

“State RPS policies require utilities to buy a certain amount of renewable energy, and these programs have emerged as one of the most important drivers of renewable energy deployment in the U.S.,” said Ryan Wiser, of Berkeley Lab's Environmental Energy Technologies Division (EETD), who was one of two primary authors for this report. “But, as the popularity and importance of these RPS have increased, so too has the need to keep up with the design, early experience, and projected impacts of these programs. Our report is designed to meet that need.”

Collectively, the RPS policies that are in place today in 25 states and Washington, D.C., apply to nearly 50% of total U.S. electricity load. In addition, four new states joined the RPS roster in 2007.

“Many of these policies have been established recently and each is designed differently,” said Galen Barbose, the report's other primary author and also a member of Berkeley Lab's EETD. “As a result, the experience has been decidedly mixed.”

Some of the key findings of the study include:

  • More than 50% of non-hydro renewable capacity additions in the U.S. from 1998 through 2007 occurred in states with RPS policies, and 93% of these additions came from wind power.

  • Existing state RPS policies, if fully achieved, requires roughly 60 GW of new renewable capacity by 2025, equivalent to 15% of projected electricity demand growth.

  • Solar set-asides in state RPS policies are becoming more common, and these policies have supported more than 165 MW of new solar capacity so far; a total of roughly 6,700 MW of solar capacity would be needed by 2025 to fully meet these set-asides.

  • The early-year renewable energy purchase targets in the majority of state RPS policies have been fully or almost-fully achieved, with overall average compliance at 94% in 2006.

  • Some states have struggled to meet early-year RPS targets, and many states have been reluctant to penalize non-compliance.

  • Renewable energy certificate (REC) tracking systems continue to expand, and all but four states allow unbundled RECs to count towards RPS compliance.

  • The cost of RPS policies varies by state, but in most states, these programs have, so far, increased electricity rates by 1% or less; in several states, the renewable electricity required by RPS policies appears competitive with fossil generation.





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me