Augmented CAT 6A connector

Augmented CAT 6A connector is independently tested by Intertek/ETL to exceed component performance as defined in the recently finalized ANSI/TIA/EIA-568-B.2-10 standard.

04/16/2008


Augmented CAT 6A connector is independently tested by Intertek/ETL to exceed component performance as defined in the recently finalized ANSI/TIA/EIA-568-B.2-10 standard. This new standard defines performance and testing requirements up to 500 MHz for Augmented Category 6 cabling systems to support the operation of IEEE 802.3an 10GBASE-T applications up to 100 meters. The TIA standard was approved for publication at the TIA TR42 engineering committee on February 8, 2008. For more about CAT 6A connectors from Leviton, click here .





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
April 2018
VRFs, lighting controls, BIM coordination, and more
March 2018
Sizing water pipes, ASHRAE 90.1, recovering waste heat, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me