ASTM International Subcommittee on Evacuation Devices Forms Task Groups

03/03/2005


The American Society of Testing and Materials (ASTM) International Subcommittee E06.77 on High Rise Building External Evacuation Devices initiated activity at the October 2004 meeting of Committee E06 on Performance of Buildings, by establishing the following three task groups:

%%POINT%% Platform Devices: Development of specifications for high-rise external platform devices for evacuation of persons when the primary evacuation routes to a safe zone are unavailable and for transport of emergency responders.

%%POINT%% Chute Devices: Development of specifications for high-rise external chute devices for evacuation of persons when primary evacuation routes to a safe zone are unavailable and may transport emergency responders to scene.

%%POINT%% Controlled Descent Devices: This standard defines the specifications, requirements, performance, design, practices, markings, construction and test methods for external high-rise building controlled descent devices for evacuation of persons when primary evacuation routes to a safe zone are unavailable and may have the capability of transporting emergency response personnel to the scene.

The subcommittee and task groups are seeking additional knowledgeable participants and device manufacturers to be involved in the development of these standards, and have established the following scope:

“Development and maintenance of standards for terminology, specification, performance, practices and test methods for devices for high-rise building external evacuation of persons when the primary evacuation routes to a safe zone are unavailable. Such devices may also have the capability of transporting emergency responders. Devices do not include rope or chain ladders, helicopters with platforms, parachutes, balloons, or evacuation chairs.”

Task groups have initiated activity to develop draft standards ready for subcommittee ballot by the next meeting to be held during ASTM Committee Week, April 17-20.

For further technical information go to www.astm.org .





Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
June 2018
Chilled-water system design, NFPA 99, Grounded power supply systems
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me