ASHRAE publishes design guide for healthcare facilities

Advanced Energy Design Guide designed to help health care facilities increase efficiency by 30% over 90.1-1999

11/19/2009


 

ASHRAE has announced that it has released the Advanced Energy Design Guide (AEDG) for Small Hospitals and Healthcare Facilities, making it the sixth in the AEDG series.

According to ASHRAE , the AEDG for Small Hospitals and Healthcare Facilities is designed to provide recommendations for achieving 30% energy savings over the minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-1999. In an effort to promote building energy efficiency, ASHRAE and its partners have made these guides available for download in PDF format at no charge (the Healthcare Facilities guide is 6 Mb). Hardcopies can be purchased from the same Website for a nominal charge.

The Guide focuses on small healthcare facilities up to 90,000 sq ft, including acute care facilities, outpatient surgery centers, critical access hospitals, and inpatient community hospitals. Guidance is provided on the design of energy-intensive heating and cooling systems typical for these facilities, as well as recommendations on daylighting and other energy-saving measures. Commissioning also is covered, and case studies from facilities in five climate zones are provided.

"The recommendations in the Small Hospitals and Healthcare Facilities Guide provide good design practices for integrating energy efficiency in a healthcare environment, while maintaining indoor air quality and required airflow and pressurization relationships, Shanti Pless, chair of committee that wrote the guide, said."

Advanced Energy Design Guides are being developed through the collaboration of ASHRAE , the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), and the U.S. Green Building Council (USGBC), with support from the Department of Energy (DOE), to help meet all of an owner's energy performance requirements.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me