Arup Thoughts: Reduce your building's demand on water supplies

In many countries of the world, there is increasing demand placed on existing water supplies. As well as developing new supplies of water, there is much we can do to reduce the demand placed on our existing supplies.

05/07/2014


Courtesy: ArupDespite the vital role water supplies play in effective sanitation, the toilet hasn’t fundamentally changed since the Victorian era. In the UK, for example, toilet flushing accounts for around 30% of household water use.

So imagine a system that combines ultra-efficient toilet designs with harvested rainwater and recycled water for flushing. Rather than relying on the mains water supply, this could be water sourced from community-scale networks. Just as distributed energy taps into local sources of heat or electricity, water reuse networks would tap into suitable sources of rainwater and treated wastewater and match them to demand for flushing and other purposes such as irrigation. You could flush your toilet with water piped from the local leisure centre, for example – saving both potable water and the energy used to treat it.

I think this approach could help safeguard the world’s valuable water resources and such a decentralized system could make it possible to supply remote communities and growing developing-world cities.

Like many good innovations it’s an evolution, not a revolution. It would complement, rather than replace, existing water supply and wastewater infrastructure. But it would provide opportunities to save water, energy, and money. It could even give traditional water utility companies the opportunity to develop networks outside their geographic areas and provide opportunities for new entrants in the water supply market.

The first step is assessing whether a proposed water reuse network (WReN) is viable, and Arup is working with University College London and other institutions on a tool to do this. However, finding non-potable water for flushing is only half the challenge; we also need a step change in toilet design.

Twenty-five years ago, toilets used up to nine litres of water to flush. Today’s dual flush toilets use six and four, with the option of a long or short flush. Arup is working with the inventor of an innovative toilet that uses a maximum of 1.5 litres per flush, thanks to air assistance. We’ve devised a universal connector so that it can be fitted to existing drainage systems and we’ve already installed a couple in our London offices to investigate their performance, especially the ability to convey waste through the drainage system effectively.

Reducing water use for toilet flushing may be a comparatively low priority in areas where water is relatively abundant. However, it will be vital for cities in Africa and Asia that are expected to experience rapid population growth. According to Water Aid, there are currently 2.5 billion people without a toilet. I think the combination of ultra-efficient toilets and water reuse networks could help reduce that depressing statistic.

Martin Shouler is Arup's global skills leader for Environmental Services Engineering. This article originally appeared on Arup Thoughts. Edited by Jessica DuBois-Maahs, associate content manager, CFE Media, jdmaahs[at]cfemedia.com.



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
July 2018
Integrating electrical and HVAC systems, emerging trends in fire, life safety, ASHRAE 90.4
June 2018
Chilled-water system design, NFPA 99, Grounded power supply systems
May 2018
40 Under 40 winners, fire and life safety, performance-based designs, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me