Arup Thoughts: Making the most of daylight

Daylight is vital to our health and well-being and making more use of daylight in place of artificial lighting can help reduce energy consumption.


Ensuring our homes and places of work have access to adequate daylight should be enshrined in city planning regulations, Courtesy: ArupEmbracing daylight is critical to sustainable urban development. In our increasingly urbanized world, planning regulations and tools should be reviewed to put daylight back at the heart of our cities.

Daylight is vital to our health and well-being and making more use of daylight in place of artificial lighting can help reduce energy consumption. These are just two reasons why prioritizing daylight in cities is an issue for developers, architects, politicians and society as a whole to give serious consideration to.

Designers and engineers have a range of tools at their disposal to help them with daylighting design. Advanced 3D computer simulations and rendering tools and incorporating statistical weather data allow the designers and engineers to predict and visualize daylight at an early stage in their designs. (Watch a time-lapse film of daylight modelling at Sacramento Airport). Taking high dynamic range (HDR) photos of existing projects showing the luminance distribution in a space enables designers to give clients an impression of what daylight quality they can expect to experience inside their space when it's complete.

But I think there's more to be done. Up until around the 1980s, architecture students were encouraged to develop an instinct for daylight and its qualities in different parts of the world. Today, I believe this part of their education has been neglected. The complex and crammed curricula of modern architectural education leave students lacking the necessary opportunity to observe, imagine and embrace daylight experiences at the beginning of every design.

Despite this, an architect might intrinsically understand the value of daylight for well-being. The bigger challenge is convincing developers. Designers need to demonstrate the added-value daylight brings: maximizing lettable floor space within development boundaries through an interactive process of design and optimization, while still meeting all the requirements for urban planning for daylight, for example.

Daylight can also be shown to be a commodity. Bioreactive facades and photovoltaic panels generate energy from daylight. As these technologies are more widely incorporated into modern building design, the availability of daylight in our cities will acquire a completely new significance.

I'm pleased to say that some cities are making progress on prioritizing daylight in planning regulations. The United Kingdom has long had the Rights to Light easement and principle, which prevents new buildings from taking daylight away from existing neighbors. But until recently, it has been possible to pay a neighbor compensation to circumvent this right. A consultation review by the Law Commission on this practice is currently ongoing and this may be a good opportunity to modernize the planning regulations upon its outcome.

In densely developed Hong Kong, where I grew up, daylight has long held a commercial value. Offices and apartments that receive a lot of daylight have a higher value and are easier to sell. As a result, Hong Kong has very detailed planning guidelines that stipulate requirements such as the distance between buildings.

Given its importance to all our lives and well-being, ensuring our homes and places of work have access to adequate daylight is a mainstream issue. Daylight must be considered in the earliest design phases of any building development and enshrined in the regulations that shape our cities.

Florence Lam leads Arup's global lighting design team. Projects she recently contributed to include: ArcelorMittal Orbit in London at Olympic Park, White Light Garden in Dublin, and the World's Largest Timepiece in Zurich. This post originally appeared on Arup Thoughts. Edited by Brittany Merchut, Project Manager, CFE Media, 

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me