Arup Thoughts: Making sound decisions

Projects are normally required to do an environmental impact assessment (EIA) at an early stage. Noise will often form part of that EIA and is usually described in technical language that only a handful of specialists can easily understand.

03/29/2016


The best way to consult communities on a project’s expected noise is to enable them to actually listen to, and experience, the sound from the proposed new trains, roads or airports. Courtesy: Arup

Projects are normally required to do an environmental impact assessment (EIA) at an early stage. Noise will often form part of that EIA and is usually described in technical language that only a handful of specialists can easily understand. Just ask Joanne Public whether she thinks 50dBLAeq, 18h outside her bedroom window is reasonable.

This techno-speak excludes non-specialists from the discussion, which seems at odds with a process that otherwise tries to be transparent. How am I, as a member of the community affected, going to judge what is reasonable if I don't even know what it is I am being asked to accept?

I think the best way to consult communities would be to enable them to actually listen to, and experience, the noise from the proposed new trains, roads or airports. That isn't quite as easy as you might imagine, because the subjective impression we form of noise is mostly a function of difference - how much noise is there relative to what was already there?

So to demonstrate noise, you have to show the whole picture, incorporating all the different noises surrounding you. It's difficult, but it can be done. And it needs to be done.

Finding ways for people to experience and understand sound is something of a passion at Arup. We started looking at this many years ago when we were trying to engage some of the artistic shareholders in decisions about the design of a concert hall. Having built our SoundLab, which can accurately create a fully 3-dimensional sound field, we found we could use it for other things too.

By capturing the existing environmental sound with 3-D recording equipment we can overlay pretty much anything on to it. This means that noise can be demonstrated very effectively to people, and they can then form their own judgements.

We're starting to try this technique in community consultations on different projects to great effect. This has included a large wind farm in Tasmania, the HS2 railway project in the UK and, more recently, demonstrations of aircraft noise. In many instances, people find that the noise they were worried about is not nearly as bad as they had been expecting.

That shouldn't detract from the need to control noise and vibration, which is still a major engineering challenge. But letting people experience noise for themselves means everyone can make a reasonable assessment of what is acceptable and what needs to be addressed.


Nick Boulter has worked for Arup for more than 27 years in various offices in the UK, Asia and Australia. His career has focussed on acoustics and noise control and he has a particular interest in making acoustics more understandable. This article originally appeared on Arup Thoughts. Arup is a CFE Media content partner.

Edited by Ksenia Avrakhova, production coordinator, CFE Media, kavrakhova@cfemedia.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me