Antimicrobial copper could improve HVAC

Research into copper HVAC units may improve indoor air quality and efficiency.

07/23/2009


The U.S. Dept. of Defense is funding research into antimicrobial copper components that can control the growth of organisms in HVAC units, according to a Copper Development Assoc. press release . The units are being studied under controlled laboratory conditions at the University of South Carolina, and units are installed for a field trial at the Fort Jackson military barracks in Columbia, S.C.

HVAC units provide dark, moist environments that are the perfect breeding grounds for the bacteria and fungi that are associated with foul odors and poor air quality . The microbes can also build up on heat-transfer surfaces and compromise the thermal efficiency of the unit. Components being replaced with copper in the studies are cooling coils, heat-exchange fins, and drip pans, which tend to allow microbial contaminants to thrive. In addition to being antimicrobial, the copper elements are highly recyclable and are better thermal conductors than their aluminum counterparts.

"Improvements in building and construction methods have generally led to increased energy efficiency, but at the same time, these 'tighter' building envelopes tend to trap bacteria, leading to odors," said Charles Feigley, principal investigator for the study. "The results of this real-world trial should encourage advancements in the design of HVAC systems."





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me