ANSI/AMCA standards approved

Standards for dampers and louvers receive approval from American National Standards Institute.

12/02/2009


 

The Air Movement and Control Association International Inc. (AMCA International) has announced that the Board of Standards Review of the American National Standards Institute (ANSI) approved the following documents:

• ANSI/AMCA STANDARD 510-09, "Methods of Testing Heavy Duty Dampers for Rating." 510-09 establishes testing methods used in measuring the performance of dampers used in the utility and heavy industry.
• ANSI/AMCA STANDARD 550-09, "Test Method for High Velocity Wind Driven Rain Resistant Louvers." 550-09 establishes uniform laboratory test methods and minimum performance ratings for water rejection capabilities of louvers intended to be used in high velocity wind conditions.

The products covered within the scope of ANSI/AMCA 510-09 include dampers, which are used to control flow of a gas (specific gas, a mixture of gas and air, or air alone) or to isolate one section of a duct system from another section of the system. The scope narrows to those dampers generally described as "custom design," "heavy duty," or "severe service," because such dampers are normally used in applications where elevated temperature, erosion and/or corrosion conditions exist.

The scope of ANSI/AMCA 550-09 is intended to demonstrate the acceptability of louver installations in facilities (essential and non-essential) that will remain in operation during high velocity wind conditions, and where water infiltration must be kept to manageable amounts.

These standards are available for purchase at www.amca.org .

 



Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
August 2018
MEP Giants, lighting designs, circuit protection, ventilation systems, and more
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me