Anniversary of Beverly Hills Supper Club Fire

Early Saturday night on May 28, 1977, a fire at the Beverly Hills Supper Club in Southgate, Ky. left 165 dead and 70 injured. The Memorial Day weekend fire, which occurred 30 years ago, is still one of the deadliest fires in the history of the United States.

06/07/2007


Early Saturday night on May 28, 1977, a fire at the Beverly Hills Supper Club in Southgate, Ky. left 165 dead and 70 injured. The Memorial Day weekend fire, which occurred 30 years ago, is still one of the deadliest fires in the history of the United States.

“Poor building design was a major contributing factor to the significant number of deaths and injuries,” said Chris Jelenewicz, engineering program manager with the Bethesda, Md.-based Society of Fire Protection Engineers . “Additionally, many lives were lost because the fire burned out of control for a considerable amount of time before the occupants were notified that an emergency existed in the building.”

At the time of the fire, the Beverly Hills Supper Club was known as the “Showplace of the Stars.” The building was a multi-function restaurant/nightclub and entertainment facility. The structure was mostly one-story high and occupied almost 1.5 acres.

Fire investigators believed the cause of the fire to be electrical failure. The fire started in a combustible concealed space in an unoccupied room, where it burned unnoticed for a significant amount of time. Once the fire was discovered by staff, instead of notifying the occupants to exit the facility, the staff unsuccessfully attempted to extinguish the fire. Soon after the fire was first observed, the fire spread quickly throughout the building via the main corridors.

More than 2,400 people occupied the building at the time of the fire. Over 1,200 were in the club’s largest room, waiting to hear entertainer John Davidson perform. Following the fire, it was determined that this room did not have a sufficient number of exits.

By the time the occupants of the largest room were told to exit, heavy black smoke was observed in the room. The majority of the fire deaths occurred in this room.

In addition, the building was not equipped with a sprinkler system or a fire alarm/detection system.

“Because of the delay in notification, the lack of fire protection systems and an insufficient number of fire exits, the occupants just didn’t have enough time to get out alive,” said Jelenewicz.

Most of the deaths were due to the inhalation of smoke or toxic gases. Many of the dead were reported to be piled on top of each other. Others were left sitting dead at their tables.

Additional contributing factors to the number of deaths and injuries included combustible interior finishes, a delay in calling the fire department and the lack of an evacuation plan.

As a result of this fire, many building requirements were enhanced to make night clubs and other buildings with large populations safer from fire. Some of these requirements included provisions for improved exiting systems, safer interior finishes, emergency planning and the installation of fire alarm and automatic fire suppression systems.

Moreover, the fire provided new insight for the fire protection engineering community on how humans behave in fires. For example, in the Beverly Hills fire, it was observed that the wait staff assisted in the evacuation of the patrons. These types of observations showed how the roles and responsibilities of building occupants influence decisions made during a fire.

“The Beverly Hills Supper Club Fire reminds us of the threat that is posed by fire and the importance of designing buildings that that keep people safe from fire,” said Jelenewicz.





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me