Active chilled beams

Active chilled beams provide high efficiency cooling/heating and are specifically designed for the loads of North American commercial building applications at hospitals, office buildings, and schools.

02/27/2015


Series of active chilled beams that provide high efficiency cooling/heating.A series of active chilled beams that provide high efficiency cooling/heating and are specifically designed for the loads of North American commercial buildings. The chilled beams feature up to 25% and 50% reduction in pump and fan horsepower, respectively, versus conventional chilled water loop or rooftop forced air HVAC system methods. These beams feature a 12-slot nozzle that's field-adjustable with two hand-operated levers. The integral flow pattern control can also be angled as much as 45-deg to address room hotspots. The nozzle adjustment provides a unilateral, disproportional, or equal air volume from each side. These beams offer engineers a single-source responsibility system of cooling, dehumidification, and heating. 

Semco LLC

www.semcohvac.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me