7 tips for an industrial Ethernet cyber security strategy

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Here are seven tips that can create the foundation for a cyber security strategy.

09/04/2010


 

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Internet protocol (IP) strategy allows organizations access to more and better data and cost-effective remote monitoring and control of facilities, but it requires thought to avoid malicious or accidental security incidents. Here are seven tips that can create the foundation for a cyber security strategy. 

1) Physical:  Cyber security starts with physical security.  If outsiders cannot gain access to the premises, it is harder for them to access sensitive data. 

2) Firewalls:  Protect cyber assets with firewalls at the cyber perimeters of your critical cyber assets just as you protect the physical perimeter.

3) Port access control:  In addition to denying access to the building, disallowing unauthorized devices to be plugged into ports on switches and routers makes for a more secure environment.

4) Password health and authentication:  Change passwords regularly – and make sure that they are long enough and complex enough that they are difficult to crack.  Then consider adding authentication.  More secure than simple authorization (which ensures the person accessing the system is using the right code), authentication ensures that the person or device requesting access is who he/it says he/it is.

5) Encryption:  Fiber cabling is much more secure than copper when used to relay data between secure locations.  Sending encrypted data adds an extra level of protection outside secure facilities.

6) VPNs and VLANs:  Virtual Private Networks and Virtual LANS both provide extra layers of security for transmissions over multi-purpose transport networks.

7) Employee training:  Security is only as good as the practices that are in place.  Employees, without meaning to create a security breach, can be lax with passwords, security codes and other primary measures unless they are educated – and reminded – about the importance of security.

- Peter Wood is vice president of operations for GarrettCom Inc. www.garrettcom.com.

Also read, from Control Engineering:

10 Control System Security Threats;

Securing Legacy Control Systems; and

Cyber security for control systems: More tips, warnings from INL

- Edited by Mark T. Hoske, Control Engineering, www.controleng.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me