3-D sensor for indoor air unit

Mitsubishi Electric's 3-D i-see Sensor is a small, yet powerful component mounted to the exterior panel of the ceiling cassette.

03/21/2017


Mitsubishi Electric's 3D i-see Sensor is a small, yet powerful component mounted to the exterior panel of the ceiling cassette. Courtesy: Mitsubishi Electric3-D i-see Sensor continuously analyzes the thermal profile of a room, identifying cool and warm spots. To achieve an accurate thermal profile, it performs hundreds of circular scans, with multiple points per scan, continuously monitoring a given space. When a room is occupied, the 3-D i-see Sensor scans and identifies heat signatures and applies cool or warm air as needed throughout the space. For maximum personalized comfort, this feature may be customized to direct the unit to deliver air toward or away from the occupants. In an unoccupied room, the sensor automatically adjusts the temperature levels and may also be customized to switch to an energy efficiency mode. The indoor unit is available in capacities ranging from 8,000 to 48,000 Btu/h. 

Mitsubishi Electric 

www.mehvac.com

http://www.mehvac.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me