Question 1

How do you test air quality in a building?

Accepted Answer

There are several ways to test air quality in a building, including:

Air sampling: This method involves collecting air samples using a device such as a pump and filter or a passive sampler and then analyzing the samples in a laboratory to determine the levels of pollutants such as volatile organic compounds (VOCs), carbon monoxide (CO), particulate matter (PM) and radon.
Direct-reading instruments: These devices measure the levels of pollutants in the air in real-time, such as handheld monitors for carbon monoxide, formaldehyde and other gases.
Building pressurization test: This method is used to test the airtightness of a building, which can help identify leaks that may be allowing outdoor air pollutants to enter the building. The test is performed by using a blower door to create a pressure difference between the inside and outside of the building and then measuring the airflow through the building envelope.
Indoor mold test: This method is used to test the presence of mold spores in the air or on surfaces, which can cause health problems if left untreated. This can be done by collecting samples of the air or surfaces and then analyzing them in a laboratory or by using a handheld mold detection device.

Question 2

What is indoor air quality in a building?

Accepted Answer

Indoor air quality (IAQ) in a building refers to the quality of the air inside the building in terms of temperature, humidity, ventilation and the presence of pollutants. Good IAQ is essential for the health, comfort and productivity of building occupants. Poor IAQ can cause a range of health problems such as allergies, headaches, asthma and even cancer.

There are several factors that can affect IAQ in a building, including:

Pollutants: These include chemicals, gases, particles and biological contaminants such as mold, bacteria and allergens.
Temperature and humidity: High or low temperature and humidity levels can cause discomfort and can also support the growth of mold and bacteria.
Ventilation: Insufficient ventilation can cause a buildup of pollutants in the air, while proper ventilation can help to remove pollutants and bring in fresh outdoor air.
Building materials and furnishings: Certain building materials and furnishings can release pollutants into the air over time, such as formaldehyde in pressed wood products or VOCs in paint and carpeting.

Question 3

How do you purify air in a building?

Accepted Answer

There are several ways to purify air in a building, including:

Air filtration: This method involves using air filters to remove pollutants from the air. Air filters can be installed in HVAC systems or as standalone units. There are several types of air filters, such as mechanical filters, electronic filters and UV filters, each with its own capabilities to remove different pollutants.
Air purifiers: These devices use various technologies such as HEPA, ozone and ionization to remove pollutants from the air.
Ventilation: Increasing the amount of fresh outdoor air entering the building can help to dilute indoor pollutants and improve air quality. This might be done via a dedicated outdoor air system or DOAS.
Air cleaning: This method involves using technologies such as photocatalytic oxidation, ozone generation and UV-C light to remove pollutants from the air.
Humidity control: Maintaining a relative humidity level between 30% and 60% can help prevent the growth of mold, bacteria and other harmful microorganisms.

Question 4

What are the four major indoor air pollutants?

Accepted Answer

There are many indoor air pollutants that can affect the air quality in a building and four major ones are:

Volatile organic compounds (VOCs): These are chemicals that are released into the air from a variety of sources, such as paints, cleaning products, carpets and furniture. They can cause a range of health effects, such as headaches, dizziness and respiratory problems.
Carbon monoxide (CO): This is a colorless and odorless gas that is produced by the incomplete burning of fossil fuels. It can cause symptoms such as headaches, dizziness and nausea and can be fatal in high concentrations.
Particulate matter (PM): These are small particles that are suspended in the air. They can come from a variety of sources, such as outdoor air pollution, construction activities and indoor activities such as cooking and cleaning. They can cause respiratory problems and aggravate existing respiratory conditions such as asthma.
Biological pollutants: These are living organisms or their byproducts that can cause health problems, such as bacteria, mold, dust mites, pollen and pet dander. They can cause a range of respiratory problems and can aggravate existing respiratory conditions such as asthma.

Air Quality

Colorado schools receive air filters to improve air quality, reduce COVID-19