Westlake Reed Leskosky announces promotions

Several engineers—plus other professionals—have been promoted at Westlake Reed Leskosky.

05/09/2014


Westlake Reed Leskosky has promoted the following individuals in recognition of their design and technical excellence, superior execution, and business administration that enhance the firm’s fully integrated design services and thought leadership.

Omar Hawit, PE, LEED APOmar Hawit, PE, LEED AP

Associate Principal, Manager of Mechanical Engineering; Washington, D.C.

California Polytechnic State University, Bachelor of Science in Mechanical Engineering, 2004

Omar contributes to signature projects for cultural, government, and university clients and the firm’s sustainable design and public web site www.recool.com. His leadership serves local ASHRAE, IBPSA, and organizations such as Future Cities, Discover Engineering, National Engineering Week, Hands on DC and DC Green Schools, for which he was awarded regional ASHRAE Flicker of Light.

Jason A. Majerus, PE, CEM, CxA, LEED AP BD+CJason A. Majerus, PE, CEM, CxA, LEED AP BD+C

Associate Principal, Manager of Mechanical Engineer; Cleveland

Syracuse University, Bachelor of Science in Mechanical Engineering 2000

Jason enhances the firm’s integrated design approach through his mechanical engineering design leadership, diverse experience including project design, energy analysis, specifications, construction administration and commissioning, and his development of protocols and staff.

 

George Sen-Chen Lin, PE, CSI CDT, LEED AP BD+CGeorge Sen-Chen Lin, PE, CSI CDT, LEED AP BD+C

Associate, Electrical Engineer; Washington, D.C.

Virginia Polytechnic Institute and State University, Bachelor of Science Electrical Engineering 1991

Well-versed in electrical systems design for a wide variety of client sectors, George’s excellence in electrical engineering design enhances signature cultural and governmental projects including the American Revolution Museum of Yorktown, IDIQ for the Architect of the Capitol, and VA Community Living Center projects in Erie, Pa., and Martinsburg, W.V.

Also promoted:

Ruth Albertelli, RA, CCS, CSI, Associate Principal, Director of Specifications; Cleveland

Diane Bartlett, CPA, Chief Financial Officer; Cleveland

David M. Combs, RA, Associate Principal, Project Director; Phoenix

Dana O. Foerster, AIA, Associate, Architect; Cleveland

Patrick James Hyland, Jr., AIA, LEED AP, Associate Principal, Architect; Cleveland

Matthew A. Janiak, AIA, LEED AP, Principal, Project Designer/Director; Cleveland

Christopher Loeser, RA, Associate, Architect; Cleveland

Todd Mayher, RA, Associate, Project Director/Project Architect; Cleveland

Brant P. Miller, RA, LEED AP BD+C, MBA, Associate, Architect; Cleveland

Katherine Ritzmann, RA, LEED Green Associate, Associate, Project Architect; Cleveland

Peter W. Rutti, AIA, Principal, Director of Design of the Phoenix Studio

Christopher B. Tilton, LC, LEED AP, Associate IALD, Associate Principal, Lighting Designer, Theatrical Specialist; Cleveland



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me