Survey: Insurance rates rising for architects, engineers

A survey by Ames and Gough revealed that 62% of architects and engineers had their insurance rates rise in 2012 with none dropping. Capacity for professional liability insurance, however, remains stable and is projected to remain so.

03/12/2013


A survey by insurance broker Ames & Gough finds a majority of insurers expect to seek further increases this year even as their overall claim experience in this line remains flat. 

According to the Ames & Gough survey of 13 leading insurance companies (which, on a combined basis, represent more than 70% of the marketplace providing professional liability insurance to architects and engineers in the U.S.), 62% had rate increases last year and the remaining insurers had flat rates. None saw their premium rates drop. Half with the higher rates had average increases of 6% to 10% or more.  

For 2013, 69% of insurers are planning rate increases. The expectations as to the size of these increases range from the low single digits to 10% or more with the average expected increase in the 4% to 8% range. The survey traced the insurers’ drive for higher rates to a variety of factors. More than half (56%) of those planning increases indicated rates had been inadequate as a result of premium reductions over time. Historic claims experience (losses going back more than two years) was the second biggest factor, cited by 44% of those planning to raise rates. Rising reinsurance costs and recent claims experience each were cited by 11% of the insurers as factors driving up rates. 

Despite the rate increases, capacity for architects and engineers professional liability insurance remains stable. To help keep their costs under control some firms are looking at increasing the size of their policy deductibles and/or purchasing so-called “split limit” policies as a way to increase protection while holding down premium costs.  For instance, a split-limit policy might have a $2 million per claim limit and a $4 million aggregate limit. Others are relying on “single-project excess limits” to meet demands for more insurance. 

From the insurers’ perspective, rate changes for an individual account may be driven by a number of considerations. This year, type of projects was cited by 87% of survey participants as the biggest driver of rate changes. That was followed by loss experience within the past two years (70%) type of work or service (62%) and historic loss experience (more than two years), cited by 39%.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me