Some fluorescents given 2-year reprieve

The Dept. of Energy has post-poned the "phase-out" date to July 14, 2014, for three T-8 general-service fluorescent lamps (GSFLs) after exception requests were filed by three companies.

05/07/2012


Responding to three individually filed exception requests, the U.S. Dept. of Energy (DOE) has postponed by two years – to July 14, 2014 – the “phase-out” date for 700-series T-8 general-service fluorescent lamps (GSFLs) manufactured by GE Lighting (GE); OSRAM SYLVANIA, Inc. (OSI); and Philips Lighting Company (Philips). Only companies that have been excepted by DOE may continue to manufacture or import the T-8 GSFLs in question beyond July 14, 2012. The lamps involved are the 4-foot medium bi-pin, 2-foot U-shaped, 8-foot Slimline, and 8-foot high-output 700-series T-8s. 

DOE’s Office of Hearings and Appeals (OHA) granted the extensions to GE, OSI, and Philips, all three of which are National Lighting Bureau sponsors. The basis for the exceptions was the growing scarcity and escalating cost of the rare-earth oxides used to manufacture the phosphors intrinsic to the proper functioning of fluorescent lamps. The severe supply/cost difficulties have been caused by manufacturing and export regulations subsequently instituted by China. According to the DOE OHA ruling, “China now controls approximately 97% of the world-wide supply of rare earth elements and rare earth oxides, and has adopted policies that have drastically reduced the volumes of rare earth elements and oxides that can be exported to U.S. lighting manufacturers.” 

The impact of China’s rare-earth market manipulations is underscored by a National Electrical Manufacturers Association (NEMA) report that world prices for terbium increased at an annual rate of more than 400% in 2011; for europium oxides, the 2011 escalation rate exceeded 500%. 

According to National Lighting Bureau Chair Howard P. Lewis (Lighting Alternatives, Inc.), the Illuminating Engineering Society of North America’s (IES’) representative on the Bureau board of directors, had the 700-series T-8 phase-out been allowed to take effect on July 14, 2012, 800-series T-8s would have been among the most logical alternatives. The cost of 800-series T-8s exceeds that of 700-series T-8s because the rare-earth content of 800-series T-8s significantly exceeds that of 700-series T-8s. Mr. Lewis observed that, “This ruling enhances affordability at a time when it’s needed. We applaud DOE for its good judgment, and GE, OSI, and Philips for seeking the exceptions.” 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me