Machine Safety: Is prevention through design enough?

U.S. consensus standards provide direction to suppliers on how to design in machine safety. Can users understand and comply with the additional requirements of ISO 13849-1?

02/18/2013


Prevention through design (PTD) has been a central theme of innovation for accomplishing machine safety in my view for at least the past decade. So, where does this concept reside today on the scale of idea through broad adoption?

I have had the privilege of knowing two industry experts for over 10 years, Bruce Main and Fred Manuele. These two gentlemen are strong industry leaders in the understanding, promotion, and implementation of PTD for machine safety. I have learned a lot about machine safety from both of them. The American Society of Safety Engineers (ASSE, www.asse.org) January issue of “Professional Safety” is largely devoted to the concept of PTD. 

In my profession I have been on the user and supplier sides of industry. As a seasoned industry expert, I readily understand and agree that a lot of attention needs to be focused at the design (supplier) side of industry. By doing so we accomplish moving machine safety from an afterthought, where safety is added to a machine on the manufacturer’s (user’s) plant floor, to a forethought, where safety is designed into the machine. Accomplishing this transition means that a user can actually purchase a (somewhat) safe machine, even though OSHA does not require a supplier to ship a safe machine.

Ah, this is the U.S. dilemma. PTD and our domestic consensus standards provide direction to suppliers on how to design in machine safety. Great!&nb

However, enforcement via OSHA is accomplished only by inspecting installed machines on a user’s plant floor. Machines being designed and manufactured by an OEM are not inspected by OSHA. Additionally, more influence comes to the U.S. via international standards, like ISO 13849-1, focused at helping designers with safety-related compliance requirements. Again, the supplier side! So who helps the user? Can users understand and comply with the additional requirements of ISO 13849-1? Do users have the qualified resources for design? 

In my opinion, it’s great that we’re focusing on suppliers’ requirements to improve machine safety. But, let’s not forget about users and how they’ll use the same standards to maintain their safety compliance.

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

 

J.B. Titus, CFSE

Related articles:

Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety – does OSHA reference consensus standards for compliance?

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

 

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me