Global smart electricity meter installed base to double by 2016

At the close of 2011, just less than 18% of the roughly 1.43 billion installed meters were communicating.

01/09/2013


By the end of 2016, the global installed base of advanced (communicating) electricity meters is expected to double, according to a new market study from  IMS Research, part of IHS Inc., titled The World Market for Smart Electricity Meters – 2012 Edition. This is forecast to propel the installed base of communicating meters to almost 35% penetration globally.

At the close of 2011, just less than 18% of the roughly 1.43 billion installed meters were communicating. These meters ranged from older one-way AMR (Advanced Meter Reading) style technology to GPRS (cellular) enabled C&I meters (commercial and industrial), to residential smart two-way meters. From 2012 onwards a mixture of fixed network technologies are anticipated to be installed worldwide, ranging from simpler RS485-wired types to next generation smart two-way PLC-OFDM meters.

Commented IMS Research Lead Analyst Michael Markides, “In 2011 the market for advanced meters reached new heights; North American shipments remained strong, while shipments to China and Spain began in earnest. Largely due to these factors it is estimated that global advanced meter shipments in 2011 were double those of 2010. However, average annual shipments from 2012 through 2014 are expected to remain at this level, only growing significantly once more in 2015 when expected European advanced metering projects go online.”

Source: IMS Research

While the markets of North America and Western Europe are mostly understood, in the long term the continued growth of the global smart meter market is highly dependent on developing economies such as China, Brazil and India. Of these three regions, China is currently the only significant market for advanced meters. In 2011, some 40 million advanced electricity meters were shipped here, however, most were simple wired RS485 meters utilizing one-way communications. The adoption of these simpler communicating meters reflects the difference in drivers in China when compared to Western Europe and North America. Rather than focusing on next-generation functionality such as voltage optimization or demand response, utilities here are more concerned with energy theft through meter tampering or bribes to readers. Brazil, India, and many other developing countries face similar challenges and may also see the need for simpler one-way style communicating meters to be installed in order to curtail non-technical losses.

Markides concluded, “In the next five years, most developed countries and industrializing, developing nations will have thriving advanced electricity meter markets. Whether installed to save on labor costs, work in conjunction with other smart grid schemes, or curtail non-technical losses, utilities worldwide are accelerating their adoption of smart metering.”

These findings and others are discussed in greater detail in IMS Research’s latest study, The World Market for Smart Electricity Meters – 2012 Edition.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me