Energy research receives ARPA funds

The DOE is offering $100 million for innovative energy research projects in grid storage, power converters, and cooling systems for buildings.

03/03/2010


 

The Dept. of Energy (DOE) has issued three Funding Opportunity Announcements (FOAs) on March 2 that offer $100 million in American Recovery and Reinvestment Act funding for the third round of its Advanced Research Projects Agency - Energy (ARPA-E) program.
The FOAs, announced at the first ARPA-E summit in Washington, D.C., are focused on innovations in three areas of technology: grid storage, power converters, and cooling systems for buildings. The goal is to promote U.S. leadership in the emerging global market for these advanced energy technologies, while cutting greenhouse gas emissions and reducing U.S. electrical consumption by as much as 30%.
Specifically, the ARPA-E program aims to support the development of modular, cost-effective, grid-scale energy storage technologies, including advanced system prototypes and proof-of-concept projects that address critical shortcomings of existing grid-scale energy storage technologies.
For power converters, the ARPA-E program seeks fundamental advances in soft (non-permanent) magnets, high-voltage switches, and high-density charge storage. By coupling these to advanced circuit architectures and scalable manufacturing, the program aims to leapfrog existing power converter performance while offering reductions in cost. The program breaks down power converters into three categories: chip-scale power converters; kilowatt-scale power converters for grid-tied photovoltaic systems and variable-speed motors; and medium-voltage energy converters for high-power applications, such as electrical substations and wind turbine generators.
For building cooling technologies, the program seeks cooling systems that use refrigerants with low global warming potential, efficient air conditioning systems for warm and humid climates, and vapor-compression air conditioning systems for hot climates. Technologies should ideally be suited for both retrofits and new cooling systems.
Concept papers must be submitted by April 2, but the deadline for complete applications has not yet been determined.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me