Wednesday, August 21, 2013
Power Fire, Life Safety Electrical, Lighting Building Types Codes and Standards HVAC
Featured Item
NEC Chapter 2: Wiring and protection
NEC Chapter 2: Wiring and protection

NFPA 70: National Electrical Code Chapter 2 (Article 200) covers the use and identification of grounded conductors, providing requirements for identification of terminals, wiring systems, and grounded conductors. This is a quick overview of the code.Read More

More Headlines
ASHRAE 62.1: A review of key requirements and concepts
Single Article

ASHRAE Standard 62.1: Ventilation for Acceptable Indoor Air Quality is the most commonly referenced standard to quantify acceptable conditions and appropriate HVAC system design.Read More

Clarifying NEC Articles 725 and 800
Clarifying NEC Articles 725 and 800

Electrical engineers should understand the differences between NEC Article 725 and Article 800, and how to apply them in low-voltage telecom projects.Read More

Sponsorship
Electrical and Power Study
Explore the 2013 study conducted by CSE to look at electrical products and power systems and how they are specified by engineers. Sponsored by Eaton. Click here.
Special report: Fan efficiency guidelines
Special report: Fan efficiency guidelines

New and proposed fan-efficiency provisions in commercial energy codes and standards are fostering cost-effective energy savings in HVAC systems.Read More

IAQ in health care settings
IAQ in health care settings

Engineers should use evidence-based design when engineering air systems in hospitals and health care facilities to ensure top-notch indoor air quality (IAQ). Read More

Linked In Twitter Facebook Google+ Rss
Featured Program
2013 MEP Giants
Read about the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms.
Click here
Sponsorship
Siemens Gamma provides lighting controls that maximize efficiency and energy savings. With Siemens Gamma, you can now provide lighting levels that are precisely what your building’s occupants need – nothing more, nothing less. Click here.
Featured Webcast
Fire and Life Safety: Notification and emergency communication systems
Every facility has inherent and unique risks, which introduce emergency communication design challenges. Understanding emergency communication system design, installation, and maintenance criteria requires engineers to be familiar with the applicable codes and standards, primarily NFPA 72: National Fire Alarm and Signaling Code. Whether designing to provide emergency communication for fire or mass notification emergencies, NFPA 72 can be used as a tool to enhance the design, installation, and reliability of fire alarm systems used for emergency communications.

Tuesday, September 24, 2013, at 11 a.m. PT /1 p.m. CT/2 p.m. ET 1 AIA CES accredited LU available for attendees

Speaker: Ray Grill, PE, FSFPE, LEED AP, Arup, Washington, D.C
Click here to register
Featured Products
Outdoor lighting control system
Outdoor lighting control system

Lutron Electronics' Limelight is a wireless exterior lighting control offering that integrates data... Read More

Direct drive utility set
Direct drive utility set

Greenheck’s model USFD-100 direct drive utility set has capacities of 200 to 6500 cfm and up to 3.0... Read More

Large capacity blower coil
Large capacity blower coil

Daikin's PreciseLine is designed to affordably condition air up to 5000 cfm by precisely matching a... Read More

Plain end-pipe joining technology for carbon steel HVAC systems
Plain end-pipe joining technology for carbon steel HVAC systems

Victaulic's QuickVic SD Installation-Ready System is a plain end-pipe joining technology designed... Read More

Related Content
Sponsorship
View the New Digital Edition Platform
Consulting-Specifying Engineer is now running on a new, more interactive and user-friendly platform. Explore the magazine right from your desktop. Click here.