Codes and Standards - Plumbing, Piping

Healthy hospital success: Codes and standards

With hospital projects, it is imperative that engineers get everything exactly right—after all, the... » more

Your questions answered: Pathogen Control by Design

Pathogen control problems in plumbing systems should be carefully guarded against. Here is... » more

Designing, enhancing office buildings: Codes and standards

Office buildings might seem like relatively simple structures, but engineers with experience in the... » more

Getting it right in mixed-use buildings: Codes and standards

Mixed-use buildings—often a combination of retail and residential—are unique structures with... » more

Webcast: Vertical Turbine Sump Design

This topic is important to plumbing engineers in order to optimize vertical turbine performance and...

Commissioning commercial buildings: Codes and standards

Ideally, all nonresidential buildings would be commissioned, and the team would start at the onset... » more

Engineering on an international scale: Codes and standards

Working on projects clear across the globe may introduce more obstacles to overcome than mere... » more

Code or standard?

What's the difference between a code and a standard? » more


View All Research


View All Webcasts

Your questions answered: Retrofitting HVAC systems in existing buildings

While the mechanical engineering team has much more control over how HVAC systems are designed and how they fit into the facility for new construction, retrofitting HVAC systems to accommodate existing buildings is considerably... » more

Your questions answered: Vertical Turbine Sump Design

Jimmy Scroggins, technical training expert at Grundfos Pumps Corp. in Lubbock, Texas, tackled unanswered questions from the Oct. 21, 2015, webcast on vertical turbine sump design. » more

BAS education: An Introduction to Designing Building Automation Dashboards, User Interfaces, and Public Kiosks

This education session will discuss the various options, end user requirements, and visualization capabilities of today’s BMS front end interfaces.

Webcast: Improving the design process for selective coordination applications

Selective coordination can be challenging to achieve in electrical distribution systems, and the resulting solution may be oversized and expensive. It is not unusual for engineers to spend countless hours researching various...

BAS education: Specifying Building Automation Systems

Specifying building automation systems, controls, and infrastructure requires detailed knowledge of the requirements of the system coupled with a good understanding of the roles and responsibilities of the contractors, suppliers,...

Research Analyst Blog

All Blog Entries

Understanding Specifications, Codes and Standards

Code or standard?

What's the difference between a code and a standard? » more

All Blog Entries


Video: High Performance Lighting: Lamp Source and...

New lighting technologies and lamp sources are... » more

View All Videos

Poll of the Week

When engineering systems in Class A office buildings, what is the most difficult engineering challenge you face? Select one.
Automation and controls
Codes and standards
Electrical and power
Energy efficiency, sustainability
Fire and life safety
Lighting, lighting controls

Click Here for Poll Archives
Sponsored by:

Codes & Standards Newsletter

Provides regular updates on codes and standards for mechanical, electrical, plumbing, and fire protection engineers, including ASHRAE, NFPA, NEC, ANSI, and a host of other national codes.

View Newsletter