Top 5 Consulting-Specifying Engineer articles, June 8-14: Series rated panels, cogeneration systems, electrical systems webcast Q&A, more
Articles about series rated panels, understanding cogeneration systems, webcast questions and answers on arc flash reduction, graduating to intelligent buildings, and a microgrid case study were Consulting-Specifying Engineer’s five most clicked articles from last week, June 8-14. Were you out last week? Miss something? You can catch up here.
Consulting-Specifying Engineer Top 5 most read articles online, for Jun. 8-14, covered series rated panels, understanding cogeneration systems, webcast questions and answers on arc flash reduction, graduating to intelligent buildings, and a microgrid case study. Link to each article below.
It is not always necessary to have every branch circuit breaker rated for the full available fault current in an electrical panel or switchboard.
Cogeneration systems-also known as combined heat and power (CHP) systems-generate both electricity and usable thermal energy. These systems typically are used on campuses that have high heat load requirements.
James A. Smith, senior offer specialist at Schneider Electric, and Antony Parsons, PhD, PE, senior staff engineer at Schneider Electric, tackled unanswered questions from the May 6, 2015, webcast on arc flash reduction and NEC 240.87 requirements.
Technology is changing what is possible in the built environment. Smart buildings integrate the design of the infrastructure, building and facility systems, communications, business systems, and technology solutions that contribute to sustainability and operational efficiency.
Microgrids can lower cost and raise reliability for the owner, and for surrounding communities.
The list was developed using CFE Media’s web analytics for stories viewed on csemag.com, June 8-14, for articles published within the last two months.
– Chris Vavra, production editor, CFE Media, firstname.lastname@example.org.