Wireless transmitter/receiver

The WRT Series Wireless Data Transmitter/Receiver works with any RS485 network protocol and allows wired and wireless equipment mixes to avoid radio signal obstacles

04/19/2013


The WRT Series Wireless Data Transmitter/Receiver works with any RS485 network protocol and allows wired and wireless equipment mixes to avoid radio signal obstacles. Courtesy: NK TechnologiesThe WRT Series Wireless Data Transmitter/Receiver provides a self-managed mesh network that works with any RS485 network protocol. The system allows for wired and wireless equipment mixes to avoid radio signal obstacles. It is also simple to configure for existing network packet parameters, provides LED indication of network status and is completely transparent to present equipment. It has wireless data transmission of up to 100 meters between receivers, and data transmissions up to 800-meter transmissions are possible with multiple hops. The WRT series offers automatic route detection, self-forming and self-healing networking, and supports 100 nodes per network maximum through 15 channels.

NK Technologies

www.nktechnologies.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me